Glued Up

One of the three doors glued up.

Glued

Glue Ups

Ready for a glue up.

Joinery Cut

Sample

Sample cuts of the joinery for the doors.

More Joinery

Cutting the Tenons.

Cutting Joinery

Cutting the long grooves to receive the rails.

Styles

Cut sides for the doors.

Milling

The mid pieces ready for milling.

Milling

The styles of 3 doors milled down from the rough. 

Wine Vat Wood

Picked up this beautiful White Oak reclaimed from Wine Vats to build some new front entry doors.

Crack

Neck

Pups

Pots

Headstock cleaned up

Pot rout cleaned up

Numbers

Fingerboard

Headstock

Gutted

SG

SG

SG Custom

Finished

Lazy Susan

Base attachment

Wax

Finish

First coat of finish

Dry fit

Almost done

Hand hewing

Giving the table top some texture

Under-side of tape top

This is the stabilizer system for the really wow table top.  It's a sliding dovetail.

Mortise and tenon

Legs

Legs and aprons fit together.

Legs

Shaping the legs by hand.

Legs

All cut and ready for shaping

Legs

Foray cuts on the table legs

Tenons

Milled

Pieces

Rough cut.  I have all the pieces ready for milling.

The big board

After cutting out all I need from the large board, here's what I have.

Legs

A look at the gorgeous straight grain in the legs. 

Legs

First cut in the big board. 

Legs

I'll get 4 legs and a few rails from this giant piece of walnut.

Top

5' x 5'
The darker piece in the middle is only dark because it was recently wet.  This is going to be a big table when finished. 

Table top

Pleased at how flat the top turned out after gluing.  That's a lot of real estate to keep in check.

Final glue up

Got the final piece glued into the tabe top.

Plugs

Joinery

Floating tounge

Milling

Walnut top planed