Plugs

Joinery

Floating tounge

Milling

Walnut top planed

Walnut

Table top layout.

Walnut

New dining table in the make.

Shutters

Glued and sanded.  Ready for hinge mortises then stain.

Carving

Split carving with a shim added. Rosewood.

Carving

Bed

Completed.  Ready for finish and a woven top.

Bed

Final glue up!

Bed

Just a little more sanding and shaping before a final glue up to complete this project.

Bed

Bed

Bed

Bed

Bed

Vertical pieces on rail

Bed

Rail into leg

Bed

Legs

Bed

Turning down the legs

Bed

Legs before turning.

Bed

Legs being cut down for joinery before turning.

Bed

Glued and ready for final shaping and sanding

Bed

Bed

Corner assembly with wedges.

Bed

Starting the glue up.

Bed

Corner detail

Bed

Webbing holes.

Bed

Drilled.  Ready now for a final sanding before I glue up the top frame.

Bed

Middle rail with the slight radius cut into it for relief.

Bed

The middle rail cut down.

Bed

Readying for a test fit.

Bed

Parts

Bed

Mortise and tenon

Bed

Rabit cut and interior mortises drilled.

Bed

Test fit corner.

Bed

Finished tenon

Bed

No more samples.  This is one of four corner tenons.

Bed

One more sample to get it tighter.

Bed

Sample corner

Bed

Tenon

Bed

Cutting the tenon checks.

Bed

End rails with miters and mortises.

Bed

Practice cut for the corners of the top frame.  Square cut mortise in the miter, ready to run.

Bed

Some careful jig making.  This us to be the jig for my mitered corners.

Bass repair

Headstock repair for a classic electric bass

Drawer fronts

New drawer fronts for my desk.  Finally....

Frame

A frame made from mahogany made for a painting.

Bed

More milling.  Here are all the parts needed for the bed structure, milled to width and thickness.  But not all are to their final dimension.

Bed

Laminating the leg pieces to make posts.

Bed

Leg milling